Hi John, I have a Shimmer2R. Do I need to update the firmware also? best, David
2014-03-18 23:26 GMT+00:00 John Coe <[email protected]>: > David, > > > > Are you using a Shimmer3? I recently had a similar issue with Shimmer3, > and found that it had come with an outdated firmware installed. Try using > the bootstrap loader to upload the BtStream_v0.2.0_shimmer3 firmware. > > > > -John > > > > > > John Coe | Lab Engineer | STX | *o:* 410.837.2022 | *f:* 410.837.7325 | *e: > **[email protected] <[email protected]>* | *i:* stx.com <http://www.stx.com/> > > This e-mail message may contain or attach information from STX, LLC. that > may be confidential. If it does, that information is for the exclusive use > of the intended recipient and shall not be retained or disclosed to others > without the written permission of STX, LLC. If you are not the intended > recipient of this e-mail, please notify the sender by return e-mail, delete > the e-mail from your computer and servers, and do not make or keep any > copies of it. Thank you. > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *David Costa > *Sent:* Tuesday, March 18, 2014 6:36 PM > *To:* [email protected] > *Subject:* [Shimmer-users] Help with Shimmer > > > > Hi, > > I don't know if here is the best place to post my doubts and problems and > I firstly apologize for that. > > I'm new in this area of hardware and sensors, but I'm starting to work > with Shimmer EMGs. > > I read part of the manuals provided and installed the sensor and needed > software. However, when I run the Multi Shimmer Sync although the > application detects my sensor (I can see the ID of the EMG) when I click on > connect it never successfully connects and stays in idle status. > > I would like to know if I'm doing something wrong here, I couldn't find an > answer in the FAQ section, thanks in advance for your help. > > > > best regards, > > David Costa >
_______________________________________________ Shimmer-users mailing list [email protected] https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
