Hi David, For my sensors, I use ShimmerConnect (provided by Shimmer company) to stream the data from the sensors. Have you tried it?
Best, Ha Dang. On Wed, Mar 19, 2014 at 12:38 AM, David Costa <[email protected]> wrote: > Hi John, > I have a Shimmer2R. Do I need to update the firmware also? > > best, > David > > > > 2014-03-18 23:26 GMT+00:00 John Coe <[email protected]>: > > David, >> >> >> >> Are you using a Shimmer3? I recently had a similar issue with Shimmer3, >> and found that it had come with an outdated firmware installed. Try using >> the bootstrap loader to upload the BtStream_v0.2.0_shimmer3 firmware. >> >> >> >> -John >> >> >> >> >> >> John Coe | Lab Engineer | STX | *o:* 410.837.2022 | *f:* 410.837.7325 | *e: >> **[email protected] <[email protected]>* | *i:* stx.com <http://www.stx.com/> >> >> This e-mail message may contain or attach information from STX, LLC. that >> may be confidential. If it does, that information is for the exclusive use >> of the intended recipient and shall not be retained or disclosed to others >> without the written permission of STX, LLC. If you are not the intended >> recipient of this e-mail, please notify the sender by return e-mail, delete >> the e-mail from your computer and servers, and do not make or keep any >> copies of it. Thank you. >> >> >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *David Costa >> *Sent:* Tuesday, March 18, 2014 6:36 PM >> *To:* [email protected] >> *Subject:* [Shimmer-users] Help with Shimmer >> >> >> >> Hi, >> >> I don't know if here is the best place to post my doubts and problems and >> I firstly apologize for that. >> >> I'm new in this area of hardware and sensors, but I'm starting to work >> with Shimmer EMGs. >> >> I read part of the manuals provided and installed the sensor and needed >> software. However, when I run the Multi Shimmer Sync although the >> application detects my sensor (I can see the ID of the EMG) when I click on >> connect it never successfully connects and stays in idle status. >> >> I would like to know if I'm doing something wrong here, I couldn't find >> an answer in the FAQ section, thanks in advance for your help. >> >> >> >> best regards, >> >> David Costa >> > > > _______________________________________________ > Shimmer-users mailing list > [email protected] > https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users > >
_______________________________________________ Shimmer-users mailing list [email protected] https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
