Re: ShopTalk: Odyssey 2 Ball putter

[comgolf]

I've messed with a couple of these D*** things for way too long (due to bent shafts) trying to make a new shaft. I ordered (supposable) ready to install double-bend shafts from GS & GW that also was a No-Go..... they were close but not anywhere alike the original. Save yourself lot of grief, for $25 (and 10 days) Callie will replace the shaft and grip built to your specs.....   Jay ----- Original Message ----- From: Ed Reeder To: ShopTalk@mail.msen.com Sent: Wednesday, March 22, 2006 5:23 PM Subject: Re: ShopTalk: Odyssey 2 Ball putter Pat, I was hoping that someone else would reply to this one with a good technique.  I have bent the shaft on this putter, but it was a REAL PITA.  The shaft was almost impossible to bend.  I ended up having to heat the shaft almost cherry red before it would do anything.  I got most of the scorch marks off the shaft, but there was definite discoloration. /Ed Pat-On Target Golf LLC wrote: I need to bend a Odyssey 2 Ball putter with the White Steel shaft 2* Flat.  I have a putter shaft bending tool but have never bent one of these putters with the crimped shaft.  Is there anything I should be aware of before I try this? Pat-On Target Golf LLC Turnersville, NJ [EMAIL PROTECTED]