Richard K, my dear friend, my machining mentor, maker of the finest head
pusher tools extant, I must humbly disagree. I can find no rule in USGA
or R&A's books which restrict lie or lofts for putters. Lengths? Yes.
Lofts? I don't think so.
TFlan
golf-equipment wrote:
/Pat there is a rule against having a putter flat, it must have at the
very least an 11* lie from straight up or flat position. Hope this
finds you not too mad at anybody, expectlly me. (,>])/
//
/RK/
//
----- Original Message -----
*From:* comgolf <mailto:[EMAIL PROTECTED]>
*To:* [email protected] <mailto:[email protected]>
*Sent:* 03/22/2006 6:16 PM
*Subject:* Re: ShopTalk: Odyssey 2 Ball putter
*I've messed with a couple of these D*** things for way too long
(due to bent shafts) trying to make a new shaft. I ordered
(supposable) ready to install double-bend shafts from GS & GW that
also was a No-Go..... they were close but not anywhere alike the
original.
Save yourself lot of grief, for $25 (and 10 days) Callie will
replace the shaft and grip built to your specs.....*
**
*Jay*
----- Original Message -----
*From:* Ed Reeder <mailto:[EMAIL PROTECTED]>
*To:* [email protected] <mailto:[email protected]>
*Sent:* Wednesday, March 22, 2006 5:23 PM
*Subject:* Re: ShopTalk: Odyssey 2 Ball putter
Pat,
I was hoping that someone else would reply to this one with a
good technique. I have bent the shaft on this putter, but it
was a REAL PITA. The shaft was almost impossible to bend. I
ended up having to heat the shaft almost cherry red before it
would do anything. I got most of the scorch marks off the
shaft, but there was definite discoloration.
/Ed
Pat-On Target Golf LLC wrote:
I need to bend a Odyssey 2 Ball putter with the White Steel
shaft 2* Flat. I have a putter shaft bending tool but have
never bent one of these putters with the crimped shaft. Is
there anything I should be aware of before I try this?
Pat-On Target Golf LLC
Turnersville, NJ
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
