At 09:12 +0000 31/3/08, I wrote:

>Anyway, I've now replaced it with an Intel card - so internal is
>e1000 driver, external is e100 driver. My box (1GHz Pentium, 256M
>RAM) can route (and count) a full 6Mbps, but as soon as I turn on
>traffic control, throughput drops to about 4Mbps. I'm guessing that
>the packet handling for traffic control is substantially more
>complicated than for routing and accounting.

Well in a real "Doh, how on earth could I do that" moment, I spotted 
the problem - a minor issue of using "kbit" instead of "k" for my 
cburst settings. All that happened (expressing it very simply) was 
that with the token bucket now "too small", the class would run out 
of tokens before the start of the next jiffie when it gets some more.

Once I fixed that then it all started working normally.

As a FYI - this box is routing a 6mbps symmetric service, doing 
traffic shaping (both in and out) for ourselves and several customers 
(with 4 levels of priority each), plus doing traffic accounting for 
all 254 addresses in a class C network. Under full load it runs at 
about 90 to 95% idle.

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users

Reply via email to