Model:DPC3939B
Vendor:Cisco
Hardware Revision:1.0
Serial Number:274340915
Processor Speed:447.28 MHz
DRAM:524288 MB
Flash:128 MB
I have a business account with static IPv4 addresses and a static IPv6 of /56.
Even if I could get IPv6 PD to work, I couldn't be guaranteed to get
the same PD each time. And then there's the question of that issued
PD being ROUTED to my shorewall gateway.
Bill
On 1/9/2018 6:01 PM, Tom Eastep wrote:
On 01/09/2018 02:05 PM, Bill Shirley wrote:
I don't use SLAAC as stated in my previous email. I use DHCP. I have
radvd configured so that a device must get a lease. My setup works.
Sadly, this leaves Android devices out in the cold IPv6 wise. **cough**,
Lorenzo, **cough**.
https://www.techrepublic.com/article/androids-lack-of-dhcpv6-support-poses-security-and-ipv6-deployment-issues/
I would be glad to configure my internal networks to use a /64 but I must
work with what I have. The Comcast modem won't issue me a PD and it
appears that even if it did, that it would not be routed. I've spent a
lot of
time on this trying to get it to work the 'recommended' way with no joy.
IPv6 still has a lot of ruff edges.
Which Comcast router do you have, Bill?
-Tom
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Shorewall-users mailing list
Shorewall-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/shorewall-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Shorewall-users mailing list
Shorewall-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/shorewall-users
