Hi Marc, I don't see anything like what you're describing. As Eric asked, are you using the Search Bar (F8) to change your filters? Do you have any other filters active that might be interfering with what you see? If you press F8 a couple of times, it will clear the filters to their default state.
-- Jim On Sun, Sep 30, 2012 at 5:32 AM, Eric L <[email protected]> wrote: I also have this problem. But discovered that if you can fix the problem if you View - Search Bar (or F8). -Ericusing 0.13.0+trunk Date: Sun, 30 Sep 2012 11:04:50 +0200 From: [email protected] To: [email protected] Subject: Re: [Shotwell] Since 0.13 Filter won work anymore - Ubuntu x86_64 Hi all again, tested a little bit more around. All Filter seems to work !!ONLY!! if you are on the Library. If I'm on a event , no Filter will work as discribed before. They will be ignored. Even if there are pictures with *,**,** or anything else or not. Cheers Marc Am 30.09.2012 08:59, schrieb Marc: > Hi, > > Before upgrading to 0.13 I had this problem: > > Shotwell starts and the default filter is set to "All photos" (STRG+0) > But shotwell shows "All photos + Rejected" and so I had to change after > every start of shotwell to another filter and back. > > I thought with 0.13 this would be better, But now the change of ANY > filter doesn show an effect and it displays only > "All photos + Rejected" > > Can someone confirm this? > > Thanks and Kind Regards > Marc > > > > _______________________________________________ > Shotwell mailing list > [email protected] > http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell > _______________________________________________ Shotwell mailing list [email protected] http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell _______________________________________________ Shotwell mailing list [email protected] http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell _______________________________________________ Shotwell mailing list [email protected] http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell
