There is definitely a bug here. And it is more complicated than I thought. to reproduce: Start shotwell. The following steps need to be done right after shotwell is started. The bug disappears if you've turned the search bar on at any point.Hightlight an Event (search bar should not be visible)From the View menu, Filter Photos on 3 starsAt this point the search bar is still not visible and all photos in this event are visible.You can click on Library now. The library IS filtered on 3 stars. And the search bar is not visible.Click on the Event again. Still All photos are showing until you hit F8 or View search bar. After you view the search bar, this problem disappears until you restart shotwell. At some point while I was testing I had a condition where All Photos was selected as the filter setting through the View menu, but the Event was stuck on 3 star filtering. But I could not reproduce this. -Eric Date: Mon, 1 Oct 2012 18:10:41 -0007 From: [email protected] Subject: Re: [Shotwell] Since 0.13 Filter won work anymore - Ubuntu x86_64 To: [email protected] CC: [email protected]
Hi Marc, I don't see anything like what you're describing. As Eric asked, are you using the Search Bar (F8) to change your filters? Do you have any other filters active that might be interfering with what you see? If you press F8 a couple of times, it will clear the filters to their default state. -- Jim On Sun, Sep 30, 2012 at 5:32 AM, Eric L <[email protected]> wrote: I also have this problem. But discovered that if you can fix the problem if you View - Search Bar (or F8). -Ericusing 0.13.0+trunk Date: Sun, 30 Sep 2012 11:04:50 +0200 From: [email protected] To: [email protected] Subject: Re: [Shotwell] Since 0.13 Filter won work anymore - Ubuntu x86_64 Hi all again, tested a little bit more around. All Filter seems to work !!ONLY!! if you are on the Library. If I'm on a event , no Filter will work as discribed before. They will be ignored. Even if there are pictures with *,**,** or anything else or not. Cheers Marc Am 30.09.2012 08:59, schrieb Marc: > Hi, > > Before upgrading to 0.13 I had this problem: > > Shotwell starts and the default filter is set to "All photos" (STRG+0) > But shotwell shows "All photos + Rejected" and so I had to change after > every start of shotwell to another filter and back. > > I thought with 0.13 this would be better, But now the change of ANY > filter doesn show an effect and it displays only > "All photos + Rejected" > > Can someone confirm this? > > Thanks and Kind Regards > Marc > > > > _______________________________________________ > Shotwell mailing list > [email protected] > http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell > _______________________________________________ Shotwell mailing list [email protected] http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell _______________________________________________ Shotwell mailing list [email protected] http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell _______________________________________________ Shotwell mailing list [email protected] http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell
