El día Monday, April 16, 2012 a las 02:01:11PM +0200, Matthias Apitz escribió:
> concerning USB networking in 046:
>
> I have had to do some things on the host side to bring the interface up
> there; and than it turned out that the usb0 interface in the FR was down
> and had no IP addr; I set this from the FR terminal and could SSH to the
> FR;
it turned out after some time of debugging that not only the IP addrs
have changed to the new 192.168.7.[1|2] pair, but also the USB Vendor
and Product ID presented by SHR have now changed to 0x0525:0xa4a2;
(those ID are used in FreeBSD in the devd(8) hook scripts to do some work,
like bring up an interface or assign IP addrs);
I changed that, rebooted the FR and now USB network is fine on plug-in;
maybe the FR disabled usb0 itself while it was not working on the other
side;
matthias
--
Matthias Apitz
e <[email protected]> - w http://www.unixarea.de/
UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370)
UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5
_______________________________________________
Shr-devel mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-devel
