On Sat, Feb 27, 2010 at 10:17 AM, <[email protected]> wrote: > Hi > Newcomer so forgive me if any of these comments are being addressed. > This was a first time trial of shr-u. > A) GSM anteena could not be powered up so unable to trial these functions. > This was attempted before any suspend occurred if this is relevant >
very same here :) investigating... d > B) Cannot set time. Date was set thorough GPS any attempt to move to GMT > +5.5 is ignored. Before setting the date thorough use of GPS it was possible > to set the time but no apparent means available to set the date. Q. Is there > a means to specify GMT +/- something? > C)Calculator functionality is good. Suggest the key legends are made much > much larger!! almost the size of the key, like in the dialer, would be > perfect > D)The display in black of 'contacts diaker messages' not a good idea. It > spoils the look of illume maain menu, even obscuring icons, when there are > already icons for these functionalities > E) After responding to screen points on initial load the touch screen > became unusual! Suggestion provide a test and if OK cannot be activated in > the centre of a test screen within 10 secs return to previous settings. As > things stand although i can SSH to the device i don't know how to access > this problem so necessitated a complete reload. > F) I had a complete failure of touchpad entry. The cicumstances were that > before returning to the illume main menu i changed the 'keyboard' settings > however when the main illume menu returned the lower portion was overwritten > still by the keyboard. Suggest this is display of a keyboard is > automatically dropped on this main menu ( or anything else for that matter) > . Anyhow all entry was locked on the entire screen. Even shutdown could not > be activated. This necessitated removal of battery. > G) tangoGPS works very well indeed. Just one Q having asked for NM it > still gave a mixture of kms knots & nautical miles! How to switch to say KM > or Miles once a selection has been made? > > Now one question if somebody could give an answer pls: If partitions on mSD > are made in FAT and ext2/3 what parameters are used by shr when formatting? > > Regards, > > David. > > > _______________________________________________ > Shr-User mailing list > [email protected] > http://lists.shr-project.org/mailman/listinfo/shr-user >
_______________________________________________ Shr-User mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-user
