Christian <[email protected]> writes:
> Hello out there,
> I own a GTA02 and want to install SHR on my microSD card. First I
> divided the SDcard into two partitions: one vFAT with 100 MB and the
> second with rest of that 4GB card. The file system on the second is
> ext2. I fetched the full-om-gta92.tar.gz archiv from this side:
> http://build.shr-project.org/shr-testing/images/om-gta02/ untared it on
> the second partition and fetched the kernel image
> uImage-2.6.29-oe11+gitr0+973a41fce60e5f6edfcf0eaf94056a57eee65e16-r8-om-gta02.bin
> from the same resource, and wrote it to the first partition. After that
> I started my moko and the Uboot-loader was unable to load the kernel. So
> I renamed the kernel to plain uImage.bin which enabled the bootloader to
> load the kernel, but stalled with a kernel panic: not syncing VFS:
> unable to mount root fs on unknown-block(179,2). Later I copied the
> kernel of the archiv (in /boot/uImage-2.6.29-rc3) into the first
> partition with the same effect. Just after I renamed the kernel to
> uImage.bin it was possible for the bootloader to read the kernel-image
> but I got the very same kernel panic. What could be the problem here?
Sounds like the kernel doesn't know that it should be getting its rootfs
from your second partition.
The fix will probably be somewhere in your u-boot or qi configuration,
so you may like to read the Wiki pages on those.
Regards,
Neil
_______________________________________________
Shr-User mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-user
