> The thing missing with regard to analogue input is the relay switch for > the analogue pinmux. > > > And you just lost me. I have no idea what that means. I can't find > anything about that in either the CWave manual or via google. Is there a > description somwhere of what I need to do to enable this?
There is 1 adc but 2 analogue channels. The support to switch between input 1 and 2 is missing. > > If you post scan logs with all your devices it should be easier to > analyse your issues. > > > Well, I thought I'd posted the relevant parts of the log from a --show, > the bit where it tries to reopen the device to talk to it, as that's > what's failing. Here's the entire log of the USBee clone on FreeBSD, > which is the combination I really want to get running. Firmware was > pulled from the repo and rebuilt about 10 minutes ago. > > bhuda% sigrok-cli -d fx2lafw --show -l 5 > sr: [00:00.000000] log: libsigrok loglevel set to 5. > sr: [00:00.000021] backend: libsigrok 0.5.0-git-17fb3e1/3:0:0 (rt: > 0.5.0-git-17fb3e1/3:0:0). > sr: [00:00.000034] backend: Libs: glib 2.46.2 (rt: 2.46.2/4602:2), > libzip 1.1.2, libserialport 0.1.1/1:0:1 (rt: 0.1.1/1:0:1), libusb-1.0 , > libftdi 1.1. > sr: [00:00.000044] backend: Host: amd64-unknown-freebsd10.3, little-endian. > sr: [00:00.000050] backend: SCPI backends: TCP, RPC, serial, USBTMC. > sr: [00:00.000071] backend: Sanity-checking all drivers. > sr: [00:00.000078] backend: Sanity-checking all input modules. > sr: [00:00.000083] backend: Sanity-checking all output modules. > sr: [00:00.000087] backend: Sanity-checking all transform modules. > srd: libsigrokdecode loglevel set to 5. > sr: [00:00.000135] hwdriver: Initializing driver 'fx2lafw'. > Driver functions: > Logic analyzer > sr: [00:00.000183] hwdriver: sr_config_list(): key 2147418112 (NULL) sdi > 0x0 cg NULL -> [uint32 20000] > Scan options: > conn > sr: [00:00.000198] hwdriver: Initializing driver 'fx2lafw'. > sr: [00:00.016394] fx2lafw: Found an fx2lafw device. > sr: [00:00.016424] hwdriver: Scan of 'fx2lafw' found 1 devices. > sr: [00:00.016456] hwdriver: sr_config_get(): key 20000 (conn) sdi > 0x803851080 cg NULL -> '3.7' > fx2lafw:conn=3.7 - CWAV USBee AX with 9 channels: D0 D1 D2 D3 D4 D5 D6 D7 A0 > sr: [00:00.016478] fx2lafw: Firmware upload was not needed. Was this the first time you ran the command after plugging in the device ? > sr: [00:00.016679] fx2lafw: Unable to open device. > Failed to open device. Did you try running as root ? > > Is there something you can use besides that? No. > > Thanks, > Mike MvH Benjamin Larsson ------------------------------------------------------------------------------ _______________________________________________ sigrok-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sigrok-devel
