On 08/03/2016 12:58 AM, Mike Meyer wrote: > On Tue, Aug 2, 2016 at 5:16 PM Benjamin Larsson <[email protected] > <mailto:[email protected]>> wrote: > > > > The thing missing with regard to analogue input is the relay > switch for > > the analogue pinmux. > > > > > > And you just lost me. I have no idea what that means. I can't find > > anything about that in either the CWave manual or via google. Is > there a > > description somwhere of what I need to do to enable this? > > There is 1 adc but 2 analogue channels. The support to switch between > input 1 and 2 is missing. > > > Ah, that I knew. The problem is that I'm not seeing any signal values. > Or rather, seeing a constant value. Unfortunately, neither fx2lafw > device works on my Windows box, which is the only thing I can run the > CWav software on to check that the hardware is working properly. >
Ok, http://sigrok.org/wiki/HT_USBee-AxPro has links to the datasheets for the adc, use the device on itself to see if there are a clock signal on the clock pin. MvH Benjamin Larsson ------------------------------------------------------------------------------ _______________________________________________ sigrok-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sigrok-devel
