Hi all,
new member here.
I want to add support for a device (DS1M12) to sigrok.
This device is using some kind of binary blob that is (I presume) send to a
altera chip.
to make this work with sigrok do I need a oss replacement for this bin blob?
How do other devices do this?
short device recap:
dual channel, 20 MS/s, usb oscilloscope
web page
http://www.easysync-ltd.com/product/520/ds1m12.html
ic's in the device:
altera: ep1k10
https://www.altera.com/en_US/pdfs/literature/ds/archives/acex.pdf
issi: is62LV256AL
http://www.issi.com/WW/pdf/62-65LV256AL.pdf
ftdi: ft2232C
http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232C.pdf
atmel: 93C56A
http://ww1.microchip.com/downloads/en/DeviceDoc/21794G.pdf
linear: 1550L
http://cds.linear.com/docs/en/datasheet/15501lf.pdf
Kr,
Mathias
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
