Hi, thanks for your patches! Just a quick update, the issue turned out to be slightly more complicated (various people have had various issues on multiple devices with an without the patch) and another fix was found after quite a while of group debugging.
The final solution, which works fine on all systems we tested so far, has been implemented by Stefan Bruens, see here: https://sigrok.org/gitweb/?p=sigrok-firmware-fx2lafw.git;a=commit;h=cfeb1a3602f587eb981c4ce1f9ff368997f4e0e0 This is now part of the released 0.1.6 fx2lafw firmware. If possible, please also test to make sure that this new version also works fine on your system. Thanks! Your LED patches were merged in slightly different form and are also part of the release, thanks! The LED polarity is unchanged by default, but you can change it at compile-time using the resp. #define in fx2lafw.h. A nicer solution for the future might be to try to detect the polarity by looking at the power-up state of the GPIO, patches welcome! Cheers, Uwe. -- http://hermann-uwe.de | http://randomprojects.org | http://sigrok.org ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
