Hello Uwe,
> > On Thu, May 03, 2018 at 10:23:49AM +0200, Jörg wrote: > > Many users of Sigrok are looking for the possibility of issuing a > > timestamp. > > The "-l 5" log output has some libsigrok timestamps btw, in case > that's what you mean here. It's missing from libsigrokdecode and > sigrok-cli output currently, though. > No, at least some people in the Sigrok Google + community are looking for the Timestamps feature to get the signals they are recording. This functionality is at least possible with sigrok-cli by piping the output. Currently also only as an offset value of a trigger edge if this is identical to the measured value start. So the question was there: ... Recently we are working on a project using logic analyzer to retrieve data from sensors, and we want the timestamps of signals changing from 0 to 1(like time of triggers) from User Zixuan ZHOU Perhaps the creator can still provide sr files to show it factually in an example. I'm looking for a job in the sources from where I provide the trigger time a reference to the system time. Of course, the time required to determine the system time and the transmission time of the triggering torque causes a small error at the time of the hardware trigger! But can not solve better because no hardware has a RTC. However, the difference times are accurate because they are determined by the measured data (by PD). Jörg ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sigrok-devel mailing list sigrok-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sigrok-devel
