Question #235193 on Sikuli changed: https://answers.launchpad.net/sikuli/+question/235193
Status: Answered => Open DavidL is still having a problem: I have now given this a try using v1.0.1 and have handled FindFailed. I see that handling it wont change anything but it lets me see a bit more of whats going on. The same problems happens, after a seemingly random amount of time after successfully finding the Apply button at the end of each iteration of loop range3, Sikuli raises an exception as it cant find it any more. I'm guessing there is likely more than one exception possible at this stage so if need be I could maybe find out which one it is. As a bit more info, I've had a look at my log file and can see that loop range3 at the start of the test takes around 1 minute 20 seconds to complete. This then gradually increases so after 24 hours is 1 minute 40, up to about 38 hours in when it takes about half an hour then 6 hours. At the time it took 6 hours, CPU load increased by about 10% and memory stayed more or less stable. As I was running this from the IDE, I stopped the run with shift alt c, and tried to start it again, which failed. Restarting the IDE enabled the run to start again. This problem may be similar to another recently reported: 235769 Always Prompt: "FindFailed: can not find *.png on the screen". -- You received this question notification because you are a member of Sikuli Drivers, which is an answer contact for Sikuli. _______________________________________________ Mailing list: https://launchpad.net/~sikuli-driver Post to : sikuli-driver@lists.launchpad.net Unsubscribe : https://launchpad.net/~sikuli-driver More help : https://help.launchpad.net/ListHelp