----- Original Message -----
From: Tom Trauberman <[email protected]>

> On April 6, 1999 Ivan wrote; <<< Adding a drop of honey does not
speed
> the reaction or lower the resistance of d. water. It does however,
make
> the colour of the CS much darker than it would otherwise have been
> (deeper yellow etc.) and so the solution LOOKS more concentrated
than it
> actually is. It may stabilise the solution though. More on this in a
> later post.>>>
>  Has anyone done a ppm test on honey produced CS to see if indeed it
is
> less concentrated? Why does CS produced this way have a deeper color
> than otherwise?
>
>   Tom

Tom,

I made 2 batches at the time of the above post, one in cold water one
in hot. I had intended to post a complete report after I had observed
the stability of the solutions, but never did :-(
However I have opened the journal, and will do so now.

I used one of my small generators, 15 Volts in 200 mls of d. water
(7.25oz).

1. Hot water - 1.5 hrs - 12 ppm
Colour - rich gold with iridescent orange, rose and violet hues. Quite
beautiful. Some turbidity (cloudiness).
Filtered - 5.5 ppm.
After 2 weeks - 1.25 ppm - turning dark - fallout.

2. Cold water - 2.75 hrs - 9.5 ppm
Colour - yellow with iridescent green hue.
Some turbidity.
Did not filter a sample.
After 2 weeks - 10 ppm - no change.
After 2 months (today) - 9.5 ppm - no change

Conclusions:
1.Honey molecules do not dissolve into component ions and lower the
resistivity of d. water.
2.The cs generation process takes the same time (within normal
variation) as pure d. water.
3.The resultant solution is much darker than  the same solution made
with pure d. water(hot water - clear to very pale yellow, cold water -
clear). Much larger particles are present, as is evidenced by the
colour and the turbidity, and the fact  that filtering lowers the
concentration.
4.The solution looks stronger than it is, using my normal generating
characteristics.
5.Stability of the solution is probably similar to pure cs of the same
particle sizes.

After these tests I decided there was no reason to add honey to the d.
water and promptly forgot all about it, but I still have half a bottle
of the cold water solution and will continue to test it periodically.
It may be that adding honey may bind with particles in a colloidal
sense and prevent them from migrating to the cathode under high
current conditions. I have not tested for this.

Regards - Ivan


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]

List maintainer: Mike Devour <[email protected]>