http://www.zetatalk.com/health/theal20g.htm

This is truly interesting.  I have been monitoring the colloidal silver
mailing list, and it seems that adding a drop of honey to the water before
making the colloid results in not only higher ppm, but smaller particle size.
If we have to add a sugar to the disinfectant to crack the spores, maybe we
can add it before the process, and thereby go higher than the 10 ppm we had
previously thought was the limit.

I will do some testing with honey and corn syrup to see.  I wonder if sourwood
would be best. :>

Marshall

Tom Trauberman wrote:

>   The attached page says the following <<< Merlin Wolf gave me a great
> tip for making superlative colloidal silver, with less concern for oxide
> buildup and runaway current flow. He suggested placing one tiny drop of
> honey into the solution at the beginning of the process. Honey is a
> saccharide (sugar) which structures the electrical and magnetic
> properties of water in a very unique way. This structuring allows the
> silver colloid to form at a faster rate, while at the same time reducing
> the buildup of silver oxide that would normally occur without the
> addition of the honey. Why this happens, I am not sure-but it works! You
> wind up with a higher density silver concentration (measured in parts
> per million {ppm}), made in a shorter period of time, with less buildup
> of silver oxide on the positive electrode! What a guy! >>> I'm confused,
> this copy says " faster rate" "higher density"
>
> Tom
>
>   ------------------------------------------------------------------------
> http://www.zetatalk.com/health/theal20g.htm




--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]

List maintainer: Mike Devour <[email protected]>