Concentration of CS Rule of Thumb Here is a rule of thumb that you can use for approximating the maximum concentration of CS when you make it...
"The maximum concentration for 1 cup of CS made at 1 milliamp for one hour would be approximately 17ppm." __________________ 3 minutes for 1 cup at 1 ma is less than 1ppm (0.85ppm). This is probably great for sterilizing the water. I don't know how great this would be for other things. Dan -----Original Message----- From: Tony Moody [mailto:[email protected]] Sent: Thursday, May 24, 2007 12:43 AM To: [email protected] Subject: Re: CS>Questions On 22 May 2007 at 15:46, Jean Baugh wrote about : Subject : CS>Questions > Hi, > > If I only had well water to work with, is there a CS machine out there > that works on a timed sequence? > > I know there are machines out there which work with distilled water > but am interested in a CS machine that will purify, or work with just > plain water. The water here is alkaline, which means more minerals in > the water. > > Thank you, > > Jean > Hi Jean, I make CS in "well water" all the time. Two things are important to do. 1/ Use very short time compared to distilled water. about 1/10 of the time. I use two to three minutes per cup of water. I sometimes stir but that doesn't seem to be important. 2/ Keep the current very low. I use a current controller which is set to 1 milliamp. If there is a visible cloud of silver coming off then the process is going too fast. You should just be able to see the silver in the beam of a laser pointer. If you drink the water then you should be able to make cs with it. Hth, Tony Moody -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: [email protected] Address Off-Topic messages to: [email protected] The Silver List and Off Topic List archives are currently down... List maintainer: Mike Devour <[email protected]>
