On Sun, 18 Jul 1999 21:33:54 -0500 (CDT), [email protected] (ROMEO
RAABE) wrote:
>Rather than use 3 9volt batteries, I foud a plug in transformer at
>Radio Shack that puts out DC 30volts at up to 1000Ma. Is that too much
>amperage? Should I stick with batteries? I haven't even started yet.
>Thanks
If you put a 1000 ohm resistor in series with one of your 30v leads,
it would limit the max current to 30 milliamps. As you are using
distilled water (a poor conductor), the current would start low (maybe
1 ma) and rise as the colloid increases in the water. You would be
stopping the proccess well before you maxed out on current.
Chuck
Experience Real-Time Full-Motion Hi-res 3D with Surround Sound!
Step Outside.
--
The silver-list is a moderated forum for discussion of colloidal silver.
To join or quit silver-list or silver-digest send an e-mail message to:
[email protected] -or- [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.
To post, address your message to: [email protected]
List maintainer: Mike Devour <[email protected]>
