I use a 4 x 6 flat silver electrode and a non-silver cathode, so I can't polarity switch. There does seem to be a lot of buildup on the cathodes either because of water quality, or the fact that I may be pushing the amperage a bit...
Dan > -----Original Message----- > From: Clayton Family [mailto:clay...@skypoint.com] > Sent: Monday, June 23, 2008 2:44 PM > To: silver-list@eskimo.com > Subject: Re: CS>Making CS/Parkinson > > On Jun 23, 2008, at 9:55 AM, Dan Nave wrote: > > > The thing is, if you have the unit that has polarity reversing, you > > don't have to clean the electrodes. Just pour the newly > made CS into > > a storage container, add more Distilled Water, and start up again. > > What could be simpler? > > > > I personally like the stronger CS that the Silver Puppy makes. The > > 5 ppm of the other unit which was referred to seems like > the minimum > > that would be acceptable. Making CS directly in the gallon > distilled > > water container is a great idea though. > > > > I personally would like to be able to select the final ppm which is > > why I made my own unit, it doesn't have polarity switching > which is a > > pain, but it does make about a gallon of 15 to 20 ppm CS in about 3 > > hours with the current limit set at 15 ma. > > geez, dude, how big are your electrodes? At one mA pre square > inch, that is a lot of silver. I just hook up my electrodes > in the opposite pole each batch. Seems to work for me, I > don't clean them either. > > kathryn > > > > > > Dan > >> From: Dee [mailto:d...@deetroy.org] > >> Sent: Sunday, June 22, 2008 8:00 AM > >> To: silver-list@eskimo.com > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: silver-list@eskimo.com > > Address Off-Topic messages to: silver-off-topic-l...@eskimo.com > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour <mdev...@eskimo.com> > > >