Carrole, I asked the manufacturer some questions. Here are the questions with the manufacturers answers:
> Do both your units, CS Master 777 AC and CS Master Universal DC, > > have the bi-directional current pattern functionality? > * yes > > > Is there any model that you produced that did not utilize > bi-directional current pattern > > functionality? > * no > > Is the green Processing light on the units an LED in series with the > output voltage? > * no >Would the unit show a green light if there is a break in a wire > between the unit and the electrodes? * yes > Does the bi-directional current pattern prevent the buildup of black > oxide on the negative electrode? * yes It is interesting that you commented that you used to get a heavy buildup of black on one of the electrodes but now you do not. According to the manufacturer you should never have had black on a rod because of their bi-directional current pattern. So, we either have the wrong supplier or your unit was defective when you received it. Some possibilities: 1) Your unit has started functioning correctly and that is why you no longer have blacking of a rod. 2) The original defect in the unit has progressed to complete failure. 3) You could have a break in one of the external wires. I would first check that there is no open in either of the external wires from the unit to the rods. - Steve -----Original Message----- From: Ode Coyote [mailto:odecoy...@alltel.net] Sent: Friday, August 15, 2008 5:18 AM To: silver-list@eskimo.com Subject: Re: forgot kind of machine CS>Silver rods Unfortunately, the specs don't say diddley about the difference between the AC and DC units. Useless Info about the power supply, but..... Like, what does the "generator" put out ??? No info. There's no reason that the power supply should make any difference or that the generator couldn't do both types of functions. Ode At 12:56 AM 8/15/2008 -0400, you wrote: >Hi Carrole, > >The manufacturer makes two unit. An AC and a DC model. They are both 12 >volts which is kind of a low starting voltage in my opinion. He >recommends running it for 3 to 8 hours. It's a pretty straight forward >looking apparatus. You could measure the voltage across the electrodes >with a volt meter if you are concerned. Otherwise, shining a laser >through it, the salt test or tasting it will give you some kind of >indication how you are doing. Below is the web site of the manufacturer. > ><http://www.colloidalsilvermaster.com/>http://www.colloidalsilvermaster >.com/ > >Hope this helps, >Andy > -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Address Off-Topic messages to: silver-off-topic-l...@eskimo.com The Silver List and Off Topic List archives are currently down... List maintainer: Mike Devour <mdev...@eskimo.com>
