Norton, Steve wrote:
Actually this is better answered by Marshall since he discovered the technique.
I did not discover it. I thought it was Ode. I did however analyze what effect H2O2 should have on CS.
I use a tsp per gallon. But you must wait at least a couple of days after making the EIS before adding the hydrogen peroxide.
I use 1/2 teaspoon per gallon 1/2 cup per 55 gallon drum, which is in the same ball park.
IMO adding HP is one greatest EIS generation discoveries. Second only to using distilled water. BTW when using HP you can make a higher ppm EIS because the HP will reduce the particle size of agglomerated silver and give a higher percentage of particles.
Please realize that Steve is saying you can make a higher ppm CS using distilled water, which would have larger particles than desired, then break the particles down later by adding H2O2. Do not brew with H2O2 in there or you will get something that looks more like the inside of a snow globe.

Marshall

- Steve N

PS - I just reread my post below and the 60% in the following should have read 40%; "percentage of silver particles to as much as 60 % by adding a small amount of hydrogen"

------------------------------------------------------------------------
*From*: john freese <jrf...@yahoo.com>
*To*: silver-list@eskimo.com <silver-list@eskimo.com>
*Sent*: Sun Aug 23 16:49:19 2009
*Subject*: Re: CS>Silver/Autism/Safety

Hello, Steve

How much hydrogen peroxide do you add to a quart of cs when you brew? Thank you. John.

--- On *Sun, 8/23/09, Norton, Steve /<stephen.nor...@ngc.com>/* wrote:


    From: Norton, Steve <stephen.nor...@ngc.com>
    Subject: Re: CS>Silver/Autism/Safety
    To: silver-list@eskimo.com
    Date: Sunday, August 23, 2009, 12:04 PM



    Argentyn 23 is a fine ionic silver but I would not consider it the
    best value.

    First, the price is $36 for 8 oz. IMO that is high. You can make
    your own for about 1/100 of that.

    Second, the high ionic content, 95%, is too high. Some ionic
    content is very desireable but, again IMO, you should try to keep
    it to less than 60% if possible. If you make your own EIS you can
    increase the percentage of silver particles to as much as 60 % by
    adding a small amount of hydrogen peroxide to the EIS you make. I
    should let you know that ionic silver vs silver particles is a
    controversial subject.
    If you choose to buy colloidal or ionic silver rather than make
    your own several other good alternative sources for colloidal
    silver (high silver particle content) are:

    * Utopia Silver - $24 for 8 oz @ 20 ppm
    * Mesosilver - $25 for 8 oz @ 20 ppm

    - Steve N

    ------------------------------------------------------------------------
    *From*: Tara McClintick <tmcclint...@fuse.net>
    *To*: silver-list@eskimo.com <silver-list@eskimo.com>
    *Sent*: Sat Aug 22 13:55:24 2009
    *Subject*: CS>Silver/Autism/Safety

    Hello,

    I am new to this list.  I am looking for information regarding
    treating my son with silver – specifically Argentyn 23.  A
    nutritional expert has recommended this product for my 13 year old
    son.  I was given info. about this list as a place to find out
    more info.  Any experience?  Risks?

    Thank-you, Tara

    Tara McClintick

    www.booksbytara.com <http://www.booksbytara.com/>




--
The Silver List is a moderated forum for discussing Colloidal Silver.

Instructions for unsubscribing are posted at: http://silverlist.org

To post, address your message to: silver-list@eskimo.com

Address Off-Topic messages to: silver-off-topic-l...@eskimo.com

The Silver List and Off Topic List archives are currently down...

List maintainer: Mike Devour <mdev...@eskimo.com>