Vikki, Perhaps you can come up with a standard procedure for making CS in a simple easy to follow uncomplicated way. **************************************************** * Something like; A 12oz glass with an inside diameter of 3 1/2" * 14 guage .999 silver wire * 3 9 volt batteries * Distilled Water * 1 black jumper wire (description) **************************************************** *1 red jumper wire (description) *Put 10 oz of DW into the glass. *Put each silver wire over opposite sides of the glass, hook 1/2" *over the edge of the glass *Hook red jumper wire to a silver wire *Hook black jumper wire to the silver wire *Hook up the 3 9 volt batteries (describe) Hook the wires up (describe) *Look for these signs... ^^ After 15 min. remove one battery (describe) ^^ Reconnect with 2 batteries (describe) ^^ After a total of 45 min. disconnect another battery (describe) ^^ Reconnect with 1 battery (describe) ^^ After 2 hours disconnect jumper leads. (describe) UNLESS .... ^^ This should yield a xxppm with a particle size of .xxxx to .xxxx ^^ Most people are comfortable with a maintenance dose of ___ ^^twice a day, Double or triple that when trying to combat a ^^health crises. **************************************************** Like you are looking for. Something easy to build and easy to run, but with fairly predictable results. It would work for me and probably a lot of people. Vikki, thank you for what you are doing. I pray God bless you with motivation, wisdom, decrement, knowledge and resources. Bob
-- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] List maintainer: Mike Devour <[email protected]>

