Well ... putting a diode in the line will give you pulsed DC, yes, but that is in no way AC, so you won't get the polarity switching benefits.
________________________________ From: Dan Nave <bhangcha...@gmail.com> To: silver-list@eskimo.com Sent: Sat, December 12, 2009 2:36:02 PM Subject: Re: CS>ac or dc? Ya, but don't call it AC in this context if you want clarity... Call it polarity switching or very low frequency AC. For higher frequency AC, just try putting a diode in line. You'll have pulsed DC Dan On Sat, Dec 12, 2009 at 6:10 AM, Ode Coyote <odecoy...@windstream.net> wrote: > > > DC that you have to switch polarity on every minute or so, IS ....AC. > You're just Alternating the Current slower than 50- 60 times a second and > it's Square wave, not Sine wave AC. > > Voltage controls ion velocity. > At a high frequency AC, voltage has to be very high so the Ions can get > away from the electrode fast and far enough, so the polarity change doesn't > just suck them back on. > > ...at 60 Hz, that's somewhere around 5 to 20 kilovolts..VERY dangerous... a > careless heart stopper. > > ode > > > At 10:19 AM 12/11/2009 -0800, you wrote: >> >> Which do you think works better for making EIS, DC that you have to switch >> polarity on every minute or so, or AC, assuming everything else is equal? >> >> Dick > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: silver-list@eskimo.com > > Address Off-Topic messages to: silver-off-topic-l...@eskimo.com > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour <mdev...@eskimo.com> > >
