Date: Mon, 23 Apr 2012 23:53:44 -0300
From: thomas.tschoe...@gmail.com
To: silver-list@eskimo.com
Subject: CS>Dilution of CS
Greetings...
Just stared to produce CS.
- 3, 9V batteries
- two rods of 99.999%
- deionized water
- 1 hour of electrolysis
- Amps always below 1.5 mA
- Distance between rods 43mm
- Temperature 22C
Questions:
- It is important to agitate the water to keep amps low and consequently
particles small. Correct ?## I believe to prevent unnecessary agglomeration
etc, any volume over 250-300ml maximum I incorporate stirring whilst in
production {personal practice/methodology}. For volumes of or below previously
stated amount I don't bother with stirring as I would only produce such small
volume for immediate consumption within the following 12 hours {just my
personal protocol is all}.
- Deionized water is distilled water that passes through a process that
captures cations and anions. So it is better. Correct ?## Someone else can
answer this one.
- After the process done one can not dilute the solution in any other kind of
water, but that one used to produce the CS. Correct ?## I would use the same
type of water if it were me, else who knows what contaminants one may be
introducing into the finished product.
- To drink CS is the less effective way to use it as the acids of the stomach
will oxidase the silver ions. Correct ?## I consider that's open to debate, I
personally believe other substances within the body will/may? have some effect
on the EIS/CS thus possibly not rendering *all* of those Ag+ ions
ineffective.It really is a matter of opinion to me, dependant on what one
chooses to believe upon questioning or reading of available literature. At
some point I believe one is encouraged to make some determinations of ones own.
N.
Thanks.
Thomas TS.