plan2t...@aol.com wrote: > > hi group...does anyone have plans fro building a structured water/ vorte > machine > which we could make ourselves? >
Hi! Below are copies of posts I sent to the list regarding structured water and a simple method. (first copy) David _______________________________________ Hi Folks! Just a quickie. You only need one bottle and its cap with a hole in it for the "vortex" part. Instead of a matching bottle for "storage", find a bottle that has an opening just a bit bigger than the neck and cap of the vortex bottle. The vortex bottle neck will just fit inside the storage bottle neck and all will work just as well. If you don't have the tools to make a hole (3/8" or so), you can take the cap from a spring water "sports bottle". It already has a hole (~ 1/2") in it , so if you pull the "knob" up to "drinking" position and saw across just below the knob, you are almost there. There will still be some of the "tube" left, but now you can see how much more you have to saw/file/chew off to get to where it is almost flat. These caps seem to vary in style and shapes, so that is why I am not being very specific. The main thing is to saw or file it to the point where going any farther will start to open the hole wider. So, that's it. A bottle and cap w/hole, a bottle into which the other bottle neck will fit, and some magnets. Can it get any simpler?? Time to cut ZZZZZZZZZZZZZ. Good luck, David ______________________________________ Greetings! Just a follow-up to provide an example. I have a 2 liter bottle with a cap that has a 3/8" hole in it. I have attached the magnets on the "shoulder" by the neck. I almost fill it with water (7/8 or so, need some space to get the water swirling around) and with finger over the hole, star swirling the water in what will be a clockwise direction when up side down and just as I am removing finger from the hole, I am inserting the neck into a gallon milk jug. The neck just fits in and the jug will support the vortex bottle. Actually, the jug opening is just a bit too small to let in enough air. It works! Later....... David ______________________________________ Hi Folks! I apologize for the delay in responding to the requests for the article on structured water, but one of the oil drilling rigs in the back yard broke into the plutonium mine under the house and my severe attention was required. WELL, on a more serious VEIN, I discovered the web site where I got the article, so you can see it live for yourself: http://www.tznet.com/busn/unusual/structure.htm I recommend reading this article first because it is much more comprehensive than the rest and explains in the first part what structured water is and how it is used in our bodies and why we might desire to have some. The middle half or so is great for the "techies" (to whom the term Zeta potential probably means something) and the last 20% or so tells us how we can make (magnetic style) structured water for our selves. I sent e-mail to the address at the end of the article to see if they still sell the water structuring kits. No reply yet. I also did some searching for more info: This is a general blurb about magnetized water: http://www.healthlibrary.com/reading/yod/april/magnet.htm Magnetized water is used in water circulation systems in industry to reduce scale deposits on the inside of pipes and this article is about tests to see if dental irrigation with magnetized water will reduce plaque. http://www.oxyfresh.com/Information/Dental_Products/calculus.txt This is an invention disclosure about a particular gizmo for making magnetized water. See if you can figure it out. http://www.karelia.ru/~alexk/disclosure/disclouser2.htm These are folks who sell products for magnetizing water for personal use or for industry. They also try to tell us why we want magnetized water. http://www.netunlimited.net/~wcr/water.html http://www.healthymagnets.com/cgi-local/SoftCart.exe/magnetiz.htm?E+scstore http://www.buyamag.com/water1.htm http://space-age.com/funnel/ Gotto go for now, Be Well! David -- E-mail to: broompi...@juno.com (no attachments) Otherwise: broompi...@netzero.net Fax to: 1-253-681-1133 __________________________________________ NetZero - Defenders of the Free World Get your FREE Internet Access and Email at http://www.netzero.net/download/index.html -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com List maintainer: Mike Devour <mdev...@id.net>
