Anyone want to comment on any of this. It's some test results and my
reply. thanks...
--- Begin Message ---
Thanks Fred. The water I was using was some Western Family brand store
bought stuff. The method I used was the 3- 9v configuration with 1.75"
of the electrodes submersed with a spacing of 2.5" for 15 minutes. 8oz
of water was used at a starting temp of 23C for sample #1 and 22.5C for
#2. This is my first try. Looks like it didn't go so well, huh? Do you
think I ought to try distilling my own water? I also just bought an
accurate ammeter and put it in series along with a potentiometer so I
can keep the current the same throughout the process. Is this a good
idea? thanks, joe...

Fred wrote:

> Joe,
>
> I would be curious to know what you are using to produce your
> distilled water and Cs!
>
> Based on the typical 1.6us/PPM:
> The water tested at 5.8us or 3.6PPM
> Sample Cs-1 tested at 7.0 us or 4.4PPM
> Sample Cs-2 tested at 6.1 us or 3.8PPM
>
> The electolysis of the water would dissassociate the material in
> the water so you would have roughly 3.6PPM of silver compounds
> and only 0.8PPM  or 0.2 PPM of ions of silver. A very ineffective
> mix, although it may help with some larger bacteria. Your water
> is poor (we look for less then 1PPM so you get 80% ions at 5PPM)
> and your process is poor, yielding less then 5PPM combined. With
> that much material in the water it should be very fast acting!
>
> I saw no settlement and would expect none, with so much of the
> product as a soluable compound. There was an odd taste but it
> may have been the rubber caps!
>
> Glad to have been of help!
>
> Cordially, Fred Peschel, Pres. PII
> http://www.health2us.com




--- End Message ---