> On Sat, 13 Nov 1999 17:59:14 -0500, "Jeffrey A. Madore"
<[email protected]>
> wrote:
>
> >So does this mean it is ok to melt silver on a stainless steel
surface?
> >Someone mentioned pyrex. Would that take the heat without cracking?
> >I tried a glazed ceramic tile and ended up with
broken-tile-silver-soup!

Sounds like fun Jeffrey,

but unless you carry out this operation in an inert atmosphere, in an
inert container you will add impurities to the silver. Oxygen and
nitrogen from the air, and other elements from the stainless.

If you heat the s/steel to red heat it will alter chemically and
outgas, and the metal will shrink.

The silver may be ok if you file the outside layer off.

Perhaps aluminium oxide kiln shelves would be a good choice. I think
one can buy aluminium oxide powder which could be mixed with water and
formed into the shape you want. It would need to be fired in a kiln
and has a shrinkage factor I believe.

Anyway I hope this helps.
Good luck.
Ivan


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>