I have been making CS for some time.  I started out
with a 16 oz. jar and was told to use boiling hot 
distilled water and no salt to have the smallest particle
size.  

Now I use a gallon jar.  The distilled water I buy here
in California always tests below 2 ppm.  I boil the 
water in a very clean glass pot.  If I use cold water the
CS process takes forever.  Also no matter how much
I limit the current (as low as 2 mA) the cathode always
gets very thick with sludge.  This is my setup:

One gallon glass jar (clean)
Plastic lid  
99.99% silver, 1" x 3.5" (wetted)
Food grade stainless steel, 1" x 8" (wetted)
Stainless steel bolts and nuts (on lid)
Electrodes spaced 1/2" apart
30 volts DC

Some of you guys are using 120 volts AC rectified and
filtered to produce ~170 volts DC.  How much current
are you running?  What is the advantage?  

Is it possible to make 5 or 10 ppm CS by the gallon
without the sludge using low voltage?  

Thank you very much for your replies.

Bil




--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>