Marshall, Thank you for your reply.
I forgot to mention that I also use an aquarium pump to supply large air bubbles in the water to keep it moving (instead of stirring). Do you ever make a gallon? Have you found anything that will keep the electrodes fairly clean after many hours (using cold water)? Very low current did not work for me. If you have the time maybe you could send out your recipe for making 16 oz. and 1 gal. You seem to be more knowledgeable than most of the others in this group. I appreciate your comments, Bil ----- Original Message ----- From: Marshall Dudley <[email protected]> To: <[email protected]> Sent: Sunday, November 28, 1999 10:27 AM Subject: Re: CS>HOT WATER? 170VDC? > 2001 TV VCR wrote: > > > I have been making CS for some time. I started out > > with a 16 oz. jar and was told to use boiling hot > > distilled water and no salt to have the smallest particle > > size. > > The hotter the water the larger the particle size. We use freezing water to > keep the particle size as small as possible. If you particle size is too > large due to dissolved gases, then the way to fix that is to boil the water > to drive out the dissolved gases, such as carbon dioxide. But you let it > cool before using it. > > Marshall > > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <[email protected]> >

