Hi Ivan, You said: >*** Again, the electrodes must arc to create ozone or H202, this is >acutally closer to Bredig's system than most realise, he arced >submerged DC electrodes, if my source is correct. I know of no HVAC >colloidal silver generator whose electrodes do not contact the water, >at least after start up. >
The "Motherlode" uses HVAC and the cathode is immersed but the anode is suspended approx 3/16ths of an inch above the water and arcs to the water. It makes 1 gal of approx 8ppm in 2 hrs. It uses 15,000v. Bill Sincerely, Bill ______________________________________________________ The wave of the Future http://www.alphacomopportunity.com/cgi-bin/d.cgi/6032 ______________________________________________________ -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <mdev...@id.net>