You see where I am going with this; 1. A higher PPM without an increase in particle size is a worthwhile objective.
2. The mechanism involved in the agglomeration of smaller particles into larger is operating during generation. 3. Evan if we accept that an increasing yellow coloration and tyndall effect indicates increased particle size, an experiment on this basis would be anecdotal at best. Do you have the necessary equipment? Marshall wrote: > When making the CS we have found that once you get to a certain ppm, 10 or so, > that the number of paticles do not increase with concentration, but the size of > the particles do. Using this technique, you may find a similar limit, or may > not. One would need to do some testing to be sure. > > Marshall > > Arnold Beland wrote: > > > This being the case and starting with very pure water, could we not use the > > process for making a concentrated form of CS? > > > > ----- Original Message ----- > > From: Marshall Dudley <[email protected]> > > To: <[email protected]> > > Sent: Sunday, July 02, 2000 7:03 PM > > Subject: Re: CS>effect of distillation on PPM? > > > > > 10 ppm. > > > > > > Marshall > > > > > > Arnold Beland wrote: > > > > > > > If I start with let us say 5PPM and distill off (evaporate?) 50% of the > > CS, > > > > what will be the PPM of the remainder? > > > > > > > > Best Regards > > > > > > > > Arnold > > > > > > > > -- > > > > The silver-list is a moderated forum for discussion of colloidal silver. > > > > > > > > To join or quit silver-list or silver-digest send an e-mail message to: > > > > [email protected] -or- [email protected] > > > > with the word subscribe or unsubscribe in the SUBJECT line. > > > > > > > > To post, address your message to: [email protected] > > > > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > > > List maintainer: Mike Devour <[email protected]>
