I think that's an excellent answer Dean. I would never have thought of switching the voltage!
Ivan ----- Original Message ----- From: "Dean T. Miller" <dtmil...@midiowa.net> To: <silver-list@eskimo.com> Sent: Friday, 15 September 2000 15:44 Subject: Re: CS>A strait forward ratio question > > I assume you have .999 (99.9%) fine silver rods. Put them in the > distilled water, making sure that only the silver touches the water. > Connect the wall-wart, set at 30 volts, to the rod ends that are out > of the water. After 15 minutes, switch the voltage to 15 volts. Run > that for 30 minutes or so. You should have pretty good CS at 8 ppm. > > (You could run the batch at 30 volts for about 25 minutes total, but > according to the gurus around here, the particle size would be bigger > -- it should still be about 8 ppm). > > -- Dean -- from (almost) Duh Moyn (CDP, KB0ZDF) -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
