You could combine both current limit and pulsed supply, in fact that would be a good way to generate CS. The current limit would only come into effect when the colloid has achieved a certain concentration and would work by lowering the peak voltage of the pulse. This would allow you to increase concentration while keeping the clear and little fallout or build up of silver on the cathode.
A simple series resistor or jfet could be used. Regards Ivan ----- Original Message ----- From: "Carol & Mike Fuller" <car...@touch88.com.au> To: "Silver list" <silver-list@eskimo.com> Sent: Monday, 16 October 2000 04:37 Subject: CS>Technical question, and anti-wrinkle formula > Hi > > I'm fairly new to the list but already I can appreciate how good it can > be, thanks to Mike and the other contributors. > > I have built, and use, my own generator using pulsed (20 khertz) output > from a regulated 15 volt supply. I find that it makes a strong, clear > colloid with virtually no 'sludge' on the cathode and only minimal silver > oxide spotting towards the end of generation. Its certainly a great > improvement over my earlier efforts with 27 volt straight DC. Although > I'm not really an electronic 'techie' I can also appreciate using a > constant current circuit would also produce a good colloid. > > My questions, for the real techies, is could you combine the two circuits, > pulsed output and constant current, and which part would come first? > This may have been discussed before but if anyone has tried this could > they share their results please? -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
