Hello group, its Jeff from Modesto. Had to jump in here to share some of the knowledge I've gained regarding magnets, healing and energised water.
First off, I needed strong magnets to build my own rings & feet gear so I can live forever. see: http://alexchiu.com/eternallife/ To find the best prices and largest selection cost me the better part of an afternoon. My choice was Dan Barmann's Force Field see : www.wondermagnet.com I needed rectangular magnets that were polerized such that the entire flat surface was north (and the other side south of course) I assumed all magnets were that way. They're not. The first batch that I received had 4 poles! It was polerized at both ends and through the middle. Finally, after much discussion with a very friendly and patient company owner, Dan Barmann I was steered toward the following magnet. I believe this is just perfect for the purposes to which the readers are interested. I have clipped a section which contains the information on this magnet: ITEM #25 Price: $4.00 ea. dimensions 6" x 1" x 1/2" Ceramic bar These are grade 8 ceramic bar magnets. They are magnetized through the thickness, so the poles are located on the 1" X 6" surface. These are relatively high grade ceramic magnets, though not nearly as strong as Neodymium magnets. Field density is about 800 gauss on the surface of one. Due to their thickness, these cast a pretty strong field some distance. Some of these have very small chips in them. ========================================= > Hi Robert and others also interested in 'energising' water, Firstly, I recommend a couple of books that will certainly improve your understanding of water: Living Energies by Callum Coats Sensitive Chaos by Theodore Schwenk Second, here is an cheap and easy way of making your own 'energised' water that you can try at home prior to generating some CS, or even just for drinking. The principles involved are vortical movement of the water, magnetism, and entrainment, which all sounds a bit fancy for what is quite simple in practice. Get two drink bottles, 2 litres (1 quart) in size. Use the type that are round and smooth from the body to the neck, not ribbed or oddly shaped. You are after ones that will produce a clean vortex of water. The easiest, and safest, would be plastic ones but the pursts may want to use glass later on. Clean the bottles thoroughly to remove any traces of their previous contents. Using unflavoured mineral or soda water bottles makes this easier. Glue the flat tops of their lids together, so that when the bottles are reattached one will be standing upside down above the other. Drill a 1 cm (3/8") hole through the centre of the glued lids. This seems a reasonable size although some may wish to play with different diameters. Glue two, or perhaps four, moderately strong bar magnets about 2 cm (3/4") below the neck of one of the bottles. Position them equidistant from each other (opposite sides for two, compass points for four) and like poles facing down (and up) the bottle length. I don't think it matters whether it is north or south facing down, as long as they are all similar. The third part is optional but I consider it important. Obtain some high-energy water from whatever source you can, which could be from an alternative energy store or over the internet. An example, and probably not the best available, would be Grander Blue water. You don't need very much so just buy a small amount. If you have choices, buy the very best you can. If it is true high-energy water, it will keep this energy for a very long time. Fill two or more very small glass bottles with the high-energy water. Make sure the bottles are clean and pure prior to filling. The idea here is to attach the bottles to the outside of the lids, so judge how many you will need to fit. They cannot be too big or else they would interfere with screwing the lids back on the bottles. Tape or glue the bottles securely. Ideally you would try to surround the lid with water, so the engineering types may try a donut-type arrangement. You can use copper for the container but don't use any metal that can be magnetised. To actually 'energise' the water, 3/4 fill the non-magnet bottle with distilled water (if you're using it for CS) or good quality filtered water (if its for drinking). Screw on the double lid and screw the inverted magnet bottle into the top. Flip the bottles over and move the base of the top bottle in a circular motion a few times to initiate a vortex in the water (a narrow tornado shape). Its worth the effort just to watch this a few times - I find it fascinating. When completely drained, flip the bottles over once more and repeat the action, this time going from the magnet to the non-magnet bottle. Voila, your water has been 'energised'. Transfer it to another container or simply cap with a different lid. If anyone tries this, please let the group know any results. Namaste Mike Fuller "/When unseen things become obvious, you can't go backwards into ignorance/" Kryon -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
