Thank you Chuck, some day these newbies will learn. "Ole Bob"
[email protected] wrote: > I suspect you've increased the silver surface area over what you were using > by a > large magnitude. > You've changed the specs, now you have to figure out what the new variables > are > doing. Get a digital multimeter, 1k resistor, thermometer, etc. > It's science fair time... (Boy, is "Ole Bob gonna yell at you!!) > Chuck > > If at first you don't succeed, skydiving is not for you. > > On Mon, 11 Dec 2000 21:55:45 -0800, "Toscano" <[email protected]> wrote: > > > Obtained a fine-looking 1oz. .999 purity ingot over the weekend, I had > > previously only made CS using wire. I cut it using a pipe cutter, scrubbed > > it with a clean cotton cloth and distilled water to get dirt and burrs off, > > then hooked each half of the ingot up to my 27VDC homemade contraption and > > sat back for the action. > > Result= the most metallic-tasting, almost vile batch ever! Ugh! Could > > this have been due to the silver being dirty even though I carefully > > cleaned it? > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <[email protected]>

