James wrote:

 
> Sols made by the CSpro HV machine are said by the manufacturer of the
> machine to be clear.

When the particle concentration gets to about 1 ppm, you can see the turbidity 
(cloudyness). So in higher concentrations, it is turbid.
 
> When I attempt to make concentrations [presumably of particles] greater than
> about 9 mg/l I frequently encounter a cloud virtually identical to the below
> photo link.  I have assumed this means larger-than-ideal particles.

It is not necessarily true that the particles are larger than ideal, just that 
there are a lot of particles. In the photo I posted, the particles were 
measured at less than 30 nm which is smaller than most cs produced.
 
> Frank: have you measured for particle size any of the "milky" sols? I see in
> the web reproduction a faint yellow tinge; this is identical to the stuff I
> occasionally make.

The particles of the sol in the photo are less than 30 nm.

In the photo, the greenish-yellow tinge is the borosilicate glass bottle, not 
the cs. If you get a yellow tinge, then there is some amount of large particles 
that are absorbing the blue the spectrum.


frank key


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>