Most likely her water was acid, which caused immediate aggregation of the CS particles, making them pink.
Marshall John Reeder wrote: > Hello Roger, > > I am using a Colloid Master 777 to make my cs. It has been turning > out a pale to medium yellow at about 12-15 ppm according to my Hanna > tester. I poured some in my wife's drinking water - plastic bottle > just opened (Costco brand), and it turned pink, measuring about > 20 ppm ??? I poured it out, yellow okay, pink, no. Probably your > batch didn't reach the shutoff point was because the electrodes > needed to be scrubbed. Mine does the same thing unless I do one > scrub during the process. > > John > > -----Original Message----- > From: Roger D Ragain [mailto:rrag...@juno.com] > Sent: Monday, May 20, 2002 5:13 AM > To: silver-list@eskimo.com > Subject: CS>my 1st. batch > > Hello Everyone, > > I made my first batch of cs Saturday. When I stopped the process the cs > was clear. Now when I opened the kitchen cuboard this morning, I saw the > cs was a dark yellow or amber. Is this acceptable? I am going to filter > it after 36 hours but, the color has suprised me. I've been using > distilled water purchased at WalMart and it failed the water purity test > but, I proceeded making it. It never reached the shutoff point but, I > shut it off after 25 hours. I didn't have any cs available as a > starter,btw. > > Roger Ragain > Cahokia, Illinois > United States of America > E-mail: rrag...@juno.com > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: silver-list@eskimo.com > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <mdev...@eskimo.com>
