There is about 10% of the total silver in particles which show up as a
Tyndall Effect when using a laser. The highest intensity of reflected light
is at the wavelength of the laser. So 632 nm size particles will reflect the
most light. 1-2 nm particles reflect a very small percentage of the light.
Most home systems make a strong TE because the particles are mostly in the
10 - 90 nm range.

The "clear as water" look is because the particles are so scarce they don't
really block much light. If most of the silver was particles, the color
would appear darker.

frank key

----- Original Message -----
From: "Arnold Beland" <[email protected]>
To: <[email protected]>
Sent: Monday, June 17, 2002 3:31 PM
Subject: Re: CS>colloidal color


> Frank,
>
> You said:
>
> "If it is clear, it is ionic silver, not colloidal silver. Mesosilver is
the
> only brown colored silver colloid with nanometer sized particles."
>
> If this is true, perhaps you could tell me what is scattering my 650nm
laser
> beam when directed into my clear solution?
>
> Arnold Beland
>
>
> ----- Original Message -----
> From: "Frank Key" <[email protected]>
> To: <[email protected]>
> Sent: Monday, June 17, 2002 2:57 PM
> Subject: Re: CS>colloidal color
>
>
> > If it is clear, it is ionic silver, not colloidal silver. Mesosilver is
> the
> > only brown colored silver colloid with nanometer sized particles.
> >
> > As explained on the website:
> > "Unlike most colloidal silver products, Mesosilver is a clear brown
> colored
> > liquid, looking like dark iced tea. It is the very high concentration of
> > mesosilver particles, not size or contamination, that gives Mesosilver
its
> > distinctive coloration.
> > Previously, it was thought that such a brown color indicated the
presence
> of
> > large silver particles, which is the case for colloidal silver produced
by
> > methods other than the mesoprocess. The small size of the silver
particles
> > is confirmed by the use of a state-of-the-art scientific instrument
> designed
> > specifically for measuring such small particles called a Photon
> Correlation
> > Spectrometer (PCS). The PCS used during the development of Mesosilver
was
> > manufactured by Malvern Instruments, Ltd. of the United Kingdom, one of
> the
> > foremost producers of such equipment in the world. The particle size
> report
> > from the Malvern PCS confirms the claimed size of 1.4 nm for
Mesosilver."
> >
> > frank key
> >
> > ----- Original Message -----
> > From: [email protected]
> > To: [email protected]
> > Sent: Monday, June 17, 2002 1:35 PM
> > Subject: CS>colloidal color
> >
> >
> > Hello,
> > I just switched my subscription to this new e-mail so I will have all of
> my
> > silver info in one place.
> > Does anyone have opinions on color?   Some companies say only the brown
> > silver is good,and others say only the totally clear is good and to
NEVER
> > take the brown.
> >
> > Also, ionic vs. colloidal....I've been reading that ionic cannot be used
> > internally because our digestive system destroys it before it can do any
> > good, and that we need to take the colloidal instead.  Some companies
list
> > the breakdown of the silver and what percentage of it is colloidal and
> > ionic.
> > Any thought on this?
> >
> > Also, someone on this list mentioned knowing about doctors using it and
> even
> > injecting it.  Where can I find these doctors?
> >
> > Summer
> >
> >
> >
> > --
> > The silver-list is a moderated forum for discussion of colloidal silver.
> >
> > Instructions for unsubscribing may be found at: http://silverlist.org
> >
> > To post, address your message to: [email protected]
> >
> > Silver-list archive: http://escribe.com/health/thesilverlist/index.html
> >
> > List maintainer: Mike Devour <[email protected]>
> >
> >
>