Mike, Sorry to tell you but necking is a real problem when the voltages rise, Also if you check with a microscope the water line there will be increased erosion.
I have made over 500 data plots using protocols suggested by members of this list, and all of them have been tested for ppm in accordance idustry standards. How many do you have? When you stop diddling around with 8 to 16 ounces with brew times in excess of 5 to 6 hours and get down to serious business of making EIS, you will find that strange things happen. I have looked at voltages ranging from 1.19 to 330 v dc and 800 to 15kv ac. all data plotted. By the way why have you not taken up my offer for a free test including free postage? "Ole Bob" Mike Monett wrote: > > > Nah. That's Bob's crazy idea. I still have the first electrodes I > used for many years. The bottoms measure about 0.027 inch and the > tops measure 0.080 inch. There is no necking whatsoever at the water > line as he claims. If there were, everyones's electrodes would > quickly wear and they would fall in the water. That has never > happened:) > > I definitely do not recommend painting the electrodes at the > waterline. You have no idea what kind of chemical reactions might go > on during electrolysis. -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
