Hi Mike,  

What about constant current?  Is higher temperatures advantageous in
some way without the increased particle size?  I use HVAC NST 15,000
volts limited to 30 mA cone method.  It is nice to take only 8 hours to
make 2 gallons if I don't cool it instead of 12 to 16hrs with a fan
blowing on the batch the entire time. 

I know, by now that's archaic by at least a few months to a year or two
in the history of CS production.  LVLCDDC (low voltage low current
density DC) with a high surface area anode and current limiting is the
way to go.  But I've already have paid for my equipment.  I'm going to
try and make to most of it for now :)

Vince

-----Original Message-----
From: Mike Monett [mailto:[email protected]] 
<snip>

  Hi Gaston,

  As Ken pointed out, increasing the temperature results  in increased
  particle size.

  You can  see  the  effect in Reid  Harvey's  work  on  ceramic water
  purifiers using silver oxide. A picture is on his web page at

    http://www.purifier.com.np/CS.html

  One of  the reasons this happens is the cs  generator  uses constant
  voltage. With no current limiting, the current can increase  to high
  values as more silver ions enter the solution from the anode.

  <snip>

  So, unfortunately, the statement at the elixa page is  incorrect, as
  is so much of the published information about cs.

Best Regards,

Mike Monett




--
The silver-list is a moderated forum for discussion of colloidal silver.

Instructions for unsubscribing may be found at: http://silverlist.org

To post, address your message to: [email protected]

Silver-list archive: http://escribe.com/health/thesilverlist/index.html

List maintainer: Mike Devour <[email protected]>