Hi Ode, I'm impressed! Thank you so much!
Jean Baugh ***************** > From: Ode Coyote <[email protected]> > > 1 nanometer = 0.001 micron > 1 micron = 10, 000 angstroms > 1 angstrom = 0.1 nanometer > 1 angstrom = 0.0001 micron > > Blah blah blah. > Google has this cool fuction where you type in 'x' microns to angstroms and it > tells you what is what. > > Fact is, most generator makers [and CS sellers] don't know what size the > particles are and will just make something up or copy someone else. > Some have the wrong test made. I don't believe SEM or TEM [electron > microscopes] results are entirely accurate due to the way they work. > Some will intentionally confuse the issue between ions and particles, where if > they're not making any particles, they'll use the size of an ion and claim > that's it..or even ignore whatever particles they do make and still use the > size of an ion or two. > If they say anything about an "ion cloud" or TE.... they're making particles. > Even ions have several ways to look at what size they are. > > It's only been recently that I knew what size 'I' made..assuming they were the > smallest possible because the CS is clear and free of color. > Well, they're not the smallest "possible". [Pretty good though...] > ..and the spread can vary some and still be within the range that has no > color.... a factor which may have several irrelevancies included such as > degrees of oxidation and so on. Frank makes very small particles and his CS > is brown, I believe? > [He won't say "how" he makes that CS...big secret. And he doesn't sell > generators. ] > > Malvern Particle Sizer results from Frank Keys Collidal Sciences Laboratory: > > 87% Ionic [single atom minus an electron at 0.000252 microns] > http://www.webelements.com/webelements/elements/text/Ag/radii.html > > 14.3% Particle portion: > > 54% @ 55.65nm or .0565 microns > > 45%@ 132.9 nm or .1329 microns > > Super high HVAC process probably does a better job, but can also make a > dangerous product [silver nitrate] if not closley watched and run just right. > > There's also some controversy on what size is best. > Some people say that a range of various sizes [that are small enough to pass > through membranes and cell walls] are best because microbes come in different > sizes. > Heck, sounds good to me. > > To my way of thinking, > If it's too big to get "in", it doesn't need to get "out". [passes right on > through] > ALL CS "contains" ions and small particles. Even if some are very large, many > are very small...so, that "bad" CS will work too. > How well determines how much. > Since there are no dosing standards that make any sense at all, enough is > enough. > Since CS at the concentrations commonly sold and made [3 to 20 PPM] is less > toxic [silver wise] than the water it's in, too much is nearly impossible. > [Some degree of caution as to dose and duration is advisable if it's extremely > strong] > > I think color is still a good rule of thumb. > Clear is best. [Virtually any generator can make clear CS up to 5 PPM.] > Yellow is Hummm..not bad [pale yellow] to OK [deep yellow] > Any other color...red, violet, green...toss it or use it topically > Mud...black, brown and cloudy cloudy...including 'other colors' will work. > [but if it's really really thick..be a bit careful with dose and duration] > > Using a timer to determine strength cannot work because water varies a lot and > therefore, time, will vary by several minutes or even hours to get to the same > point. Just a few degrees difference in water temperature changes time > considerably. > Using a PPM or other conductivity meter like a PWT is a help, but it's still > measuring apples to get oranges and changing an element in the process can > throw corrolations between virtually unrelated things, off quite a bit. > > For example: [from http://www.silver-colloids.com/Reports/cpr19/cpr_19.html] > > Earthborn Products claiming 100 PPM [Obviously using a meter to get that > figure] > > Conductivity: 164 uS/cm Total Silver Concentration: 0.52 ppm +/- 0.05 > ppm Percent Ionic: 100 > > [This might also be an example of how a high voltage setup can go wrong...but > I don't know what process Earthborn used. Why so much conductivity and so > little silver when all of it is ionic? ] > > A generator that uses current controls and a reference voltage drop to reach a > shut down point are the most accurate. There's still some inherent variation > in particle count and accuracy is still not 100%, but at least they always run > the same "way", batch to batch. > > Ode > > > At 07:36 PM 3/11/2004 -0600, you wrote: >>>>> > Hi, > > Can anyone explain the difference between the size of the colloidal silver > particles? One company will advertise one way and another company will > advertise another way. > > Apparently the smaller the silver particles, the more beneficial? > > If this is the case, can anyone say with authority which company sells a > generator that produces the smallest particles of colloidal silver? > > Thank you, > > Jean Baugh > <<<< > -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: [email protected] Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: [email protected] OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour <[email protected]>

