'fraid it's not that simple Marshall

The more particles you pack into a given area, the more "likely" they are to collide and stick together.
Heat can induce too much motion into particles and force them together. [Over around 110 deg F]

The concentration of particles is not uniform in water unless it is well stirred up and the rate of particle formation/ion emission is controlled, resulting in high concentration zones, especially near the electrodes.
I'm finding that controlling the build/collapse rates of the electromagnetic field around the electrodes can control ion density zones making particle formation and ion to particle ratios adustable. [It's being a bit tricky]

Electrodes widely spaced increases the resistance in the water...more resistance=less current=lower emmission rates=lower PPM for a given time span at a given applied voltage, and time for high concentration zones to dissipate as the process goes on if stirring is not being used.
If stirring IS being used, more current can be used and get the same result.

Looking at it like making rock candy might be a good analogy.
Once the saturation point of dissolved ions is reached, [13 PPM?] particles [crystals] start to form and go into suspension. It's apparently not all that simple either, as the saturation point doesn't appear to be 'fixed' and ionic content can far exceed 13 PPM...but not without eventually having particles.
If there are any impurities, crystals tend to form around them and grow and can do so below 13 PPM.
It's very easy to exceed the saturation point in localized zones and make particles at any 'over-all' PPM. which is why you can see an "ion cloud"...particle cloud... [ions are invisible] forming very quickly.
Once a particle forms, it generally doesn't 'un-form'.

Somewhere around 20 PPM agglomeration of particles gets "iffy" no matter how the setup works.


So, using very pure water allows high particle counts with a small size.
The contaminants don't have to be 'dissolved' contaminants [registering on a meter] to have an effect.
In fact, a piece of copper [wire] dropped into a batch of CS will become coated with a frothy structure of silver oxides and remove color and many particles from a batch of yellow CS reducing both TE and conductivity.


If well done with ions and particles well disbursed, the CS "usually" stabilizes and stays clear and develops a pretty strong TE up to around 20 PPM.
Beyond that, [30 - 100 PPM?] there are so many particles that the water can look grey. [If they didn't agglomerate into the yellow range]
If left alone... in cool water, the larger ones stratify towards the bottom. If there are distinct differences between particle sizes still within the colorless range [vs a broad even distribution of sizes within that range] you may actually see a 'banding' effect rather than a gradual difference in the intensity with the smaller ones that don't block as much light being at the top. [As viewed in a sunbeam or with a strong bright flashlight]

BTW White LED flashlights work great.

Various trace elements in the water can act as a catalyst to form larger crystals. [and they don't have to be "dissolved ionic" contaminants to do that]
Others can break large crystals apart.

Hydrogen peroxide is a strange one. [as is copper, in a different way]

Placing a blackened electrode in H2O2 will clean it up pretty fast, but if you 'leave' that same electrode in the H2O2, it will turn black again.

If you add a few drops of H2O2 to a colored batch, the color goes away and TE quality changes.[as seen with a laser] giving one the over all impression that the particle sizes have decreased.
Might well be so.

But, if you run current through that water containing H2O2, very large shiny metal snowflakes will form.

Copper apparently attracts dissolved oxygen and acts as a catalyst to form silver oxides out of both particles and ions with a possible preference toward using up particles. [Possibly because ions and small particles tend to hang around towards the top]
If the copper is in the bottom of the container where the larger particles and "sparklies" [if any] tend to stratify in still water, they will be removed and stick to the copper forming an oxide structure.


"Sparklies" are partly pollen and dust etc...and... partly [or mostly] 'plate out' particles and oxide particles that have fallen off the electrodes. If it's electrode gunk they are big and heavy enough to go straight to the bottom after a day or so and pretty much stay there while you pour the top portion off.
Most are still too small to be filtered out without using a very good filter. [and probably too big and/or chemically inert to be assimilated]

Ode



At 09:41 AM 3/12/2004 -0500, you wrote:
>>>>
You will likely find that the size of the particles is more dependent on the quality of the water than the generator design. There are some differences as to the size and spacing of the electrodes, and if the water is stirred or not. Basically the cooler the water, the lower the current, the purer the water and the wider the electrodes, the smaller the particles for a low voltage DC system.

Marshall

"[email protected]" wrote:
Hi,

Can anyone explain the difference between the size of the colloidal silver particles? One company will advertise one way and another company will advertise another way.

Apparently the smaller the silver particles, the more beneficial?

If this is the case, can anyone say with authority which company sells a generator that produces the smallest particles of colloidal silver?

Thank you,

Jean Baugh

<<<<



-- The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: [email protected] Silver List archive: http://escribe.com/health/thesilverlist/index.html
Address Off-Topic messages to: [email protected] OT Archive: http://escribe.com/health/silverofftopiclist/index.html
List maintainer: Mike Devour <[email protected]>