I wouldn't believe ANYHING this person says.
Does the name Steven Barrett ring a bell?
He said we was once on "my precious list"
We had a rather lenghty email discussion about how to improve the web copy
that had obvious errors and contradictions in terms in it that a high
school chemistry student wouldn't make.
It was taken as an 'attack'. He thought I called him an idiot.
What I said was..if you don't want to 'look like' an idiot, you'd do well
to review your web copy.
I got a lot of Mom, Pop and Bible stuff and whining about direct marketing
costs to justify the inflated prices and how little I know about business.
Well, I AM a lousy businessman...not because I don't know how, but because
I tend to give the store away.
I grew up surrounded by 'honest' businessmen...founders of huge coporations.
[If you're spending tens of thousands of dollers on mailings and only
getting a few hundred sales, that doesn't justify gouging the customers.
You need a new business model. Anyone who has that kind of money to spend
is probably online. Your customers hit the web and discover the real market
situation..so, get real.]
"which produces far too large of a particle size of silver ions"???
"If the sales literature for a low-voltage home colloidal silver generator
claims that silver ions always come off the silver wire at the same
particle size you should exercise extreme caution."
...."silver ions always come off the silver wire at the same particle
size, is telling you a lie. And if he is willing to lie to you about
something as easy to disprove as that, what else might he by lying to you
about? "
## Well, an ion is an ion..it's what happens AFTER the ion is discharged
that differs between designs.
No comment on liers.
This guy is a marketeer..a businessman..who doesn't know very much about
what he sells and probably nothing about CS.
He buys and resells the generators.
"Although we have tested many other companys home colloidal
silver generators against those distributed by our recommended vendor The
Silver Edge Health & Nutritionals, we have yet to find even ONE which
spends the extra money and time to calibrate their generators in this vital
manner to enhance your ability to produce high-quality silver ions on a
consistent basis."
1] since electrode spacing is not addressed in any but the $400 model,
complete calibration will be impossible.
2] Since the $400 unit uses a timer...complete calibration will be
impossible unless the water conductivity is pre-adjusted.
[No mention of what "calibration" means, what the calibration is or what
is calibrated.]
Even when all the variables that CAN be addressed ARE addressed,
calibration is within a sliding range of error because the only affordable
means to moniter the process [by monitering conductivity] is based on
comparing apples to oranges.
Doing it 'right' costs $5,000 to $150,000 and gets shipped on a pallet.
[...'if' you can figure out how to run the danged thing]
"Single Unit Convenience Many low-voltage colloidal silver generators
sold by other companies require the use of additional components (such as
the alligator clip wires) that must be plugged into external jacks
located on the outside of the generator box each time you make colloidal
silver. And after each usage, these components must be unplugged from the
generator box in order to stop the flow of the electrical current.
Unfortunately, this means you have loose components to keep track of when
you are not using your generator. Because of this, many people misplace or
lose crucial components to their generator, rendering it inoperative until
they can find a replacement component. But the manufacturer of the
generators distributed by The Silver Edge Health & Nutritionals has solved
this problem by taking the extra time and expense to hard-wire all
extraneous components directly into their colloidal silver generators. You
never have to worry about losing various components to your generator,
because they are permanently and firmly affixed to the generator itself.
Why havent other companies thought of innovations like this? They have.
They just dont want to spend the extra money and effort to make life
easier on you!"
### Hard wiring the wires takes a lot less labor and parts than hard
wiring jacks and the plug assemblies to fit them and makes repairing broken
leads harder. Whatever moves will eventually break. [Extra money and
effort, my eye]
The man has no idea about pro-rating parts and what that means to
durability or electronic design.
"Extra expense" in every mentioned case amounts to a couple of dollars.
[like maybe $3-$5 total...tops]
Ode
At 09:49 PM 3/19/2004 -0600, you wrote:
>
>Hi Jean,
>
>I hate to say this, but if you can get your money back, do it. The following
>link says it better than I can:
>
>http://health.groups.yahoo.com/group/silverdatawebsite/message/1682
>
>If you can't, and still want to use it, don't put any salt in the water as
>this
>will result in the production of silver chloride and higher current flow.
>The higher the current, the bigger the particles.
>
>If you want to get a new machine, there are two very good ones
>available, both made by members of this list. The Silver Puppy
>which sells for $99.00 the last I heard. And the SilverGen SG-6
>for $199.00 (I use this one).
>http://www.silvergen.com/ http://www.silverpuppy.com/
>Hope this helps.
>Al Davis
>----- Original Message -----
> From: <[email protected]>
>To: <[email protected]>
>Sent: Friday, March 19, 2004 7:49 PM
>Subject: CS>Where can I buy a CS machine that produces 0.0001 microns or
>less?
>
>
>> Hi Al,
>>
>> Mathematics isn't my strongest suit, obviously! :)
>>
>> The machine is The "Micro-Particle" Home Colloidal Silver Generator from
>The
>> Silver Edge Health & Nutritionals in Phoenix, AZ. It says it will produce
>> 0.0015 to 0.0025 micron colloidal silver.
>>
>> Do I have the wrong idea that 0.0001 microns is smaller than 0.0025?
>>
>> I thought the smaller the silver particle, the more good it would do.
>>
>> Thank you,
>>
>> Jean Baugh
>>
>> ********************
>> >
>> > If I'm not mistaken, the diameter of a silver atom is about .00025
>micron.
>> > That's larger than what you're asking for. Perhaps you meant .001
>micron.
>> > That's about 4 atoms in diameter. Getting better than your present
>machine
>> > makes might take a lot of modifications and effort. You didn't mention
>> > what kind of machine you have or any particulars about your setup and
>> > the results you're getting. Do you have a PWT meter or a laser light to
>> > test for conductivity and general particle size? The more we know the
>> > more we can help..
>> >
>> > Al Davis
>> >
>> >
>> > ----- Original Message -----
>> >>
>> >> I have a machine that produces 0.0015 to 0.0025 micron sized CS.
>> >>
>> >> However, I want to buy a CS machine that produces 0.0001 microns. I
>> > believe
>> >> this size of micron will do more good.
>> >>
>> >> Any information would be appreciated.
>> >>
>> >> Thank you,
>> >>
>> >> Jean Baugh
>> >>
>> >>
>> >> --
>>
>>
>> --
>> The Silver List is a moderated forum for discussing Colloidal Silver.
>>
>> Instructions for unsubscribing are posted at: http://silverlist.org
>>
>> To post, address your message to: [email protected]
>> Silver List archive: http://escribe.com/health/thesilverlist/index.html
>>
>> Address Off-Topic messages to: [email protected]
>> OT Archive: http://escribe.com/health/silverofftopiclist/index.html
>>
>> List maintainer: Mike Devour <[email protected]>
>>
>
>
>--
>The Silver List is a moderated forum for discussing Colloidal Silver.
>
>Instructions for unsubscribing are posted at: http://silverlist.org
>
>To post, address your message to: [email protected]
>Silver List archive: http://escribe.com/health/thesilverlist/index.html
>
>Address Off-Topic messages to: [email protected]
>OT Archive: http://escribe.com/health/silverofftopiclist/index.html
>
>List maintainer: Mike Devour <[email protected]>
>
>
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to: [email protected]
Silver List archive: http://escribe.com/health/thesilverlist/index.html
Address Off-Topic messages to: [email protected]
OT Archive: http://escribe.com/health/silverofftopiclist/index.html
List maintainer: Mike Devour <[email protected]>