Interesting -- but I'm a little hesitant to use silver plate instead of pure silver. How are you able to tell whether you are dissolving the substrate? If you feel safe with your sheet-I just bought 25 lb. roll of brand new sterling foil -92.5 Ag/7.5 Cu for scrap-16" wide It is as thick as heavy aluminum foil. I am trying to find a use for it. TJ Garland Noble Metals, Inc. ----- Original Message ----- From: "HRBE" <h...@bigpond.net.au> To: <silver-list@eskimo.com> Sent: Thursday, April 27, 2006 6:40 PM Subject: CS>Re: Bulk CS
> I have been doing some experimenting with making bulk CS. > > I have come up with the following setup. > > 1 x 5 gallon (imperial) fish tank > 1 x 36 square inches 99.99% silver plate > 1 x 36 square inches brass plate. > 1 x aquarium water pump > 1 x 30volt DC power supply, with adjustable current regulation. > > I spaced the plates @ 3 inches, I wrapped the brass plate in paper towel to > prevent the gunge from being circulated in the water. I limited the current > to 100ma. > > By wrapping the brass plate in paper towelling I don't need to wipe the > plate clean. > > 8 hours later, I have 5 gals of perfectly clear CS solution, which reads > 25uS on my Hanna HI98308 TDS meter. > > I used current control because I didn't have the time to "babysit" the > process > > I used Bob Berger's book as a guide for construction and I am building 45 > volt dc current regulated power supply to try to shorten the brew process > time. > > Hope this is of interest to the group > > John McLean > Australia > > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > > Instructions for unsubscribing are posted at: http://silverlist.org > > To post, address your message to: silver-list@eskimo.com > > Address Off-Topic messages to: silver-off-topic-l...@eskimo.com > > The Silver List and Off Topic List archives are currently down... > > List maintainer: Mike Devour <mdev...@eskimo.com> > > >
