I just love the way people who's primary language is not english express themselves.
Marshall "Carlos Pérez" wrote: > Dear Dan, > > It was a very special surprise you gave me tonight. I am proud of having > assimilated in a few weeks the teachings that you my friends have given me > so far, to the point of having a product twice as good as I thought I had! > > I expected I would reach this point in around two weeks, after we made our > new generator with current control from the diagram my friend John McLean > sent me. > > Tonight I will sleep with a smile in my face! > > Thank you very much. > > Carlos > > >From: Dan Nave <na...@comcast.net> > >Reply-To: silver-list@eskimo.com > >To: "silver-list@eskimo.com" <silver-list@eskimo.com> > >Subject: CS>Characterizing Carlos' CS > >Date: Thu, 14 Sep 2006 21:27:51 -0500 > > > >Dear Carlos, > > > >I ran the data from your colloidal silver generator through the Microsoft > >Excel "Faraday Calculator" using as values a 450ml container with the > >intervals of 15 minutes and the currents indicated, ie: .4, 1.2, 1.8, 3.0, > >and 3.8ma. > > > >Average current is 2.04 ma over 1 hour, giving 18.25 ppm total silver > >released into the water by this process. > > > >Giving that you used a starter of 10% CS from a similarly made previous > >batch we can assume that there was already a maximum of 1.825 ppm worth of > >silver in the container giving an absolute maximum amount of approximately > >20 ppm silver in your finished product. > > > >Of course, with losses of silver as seen by the residues on the electrodes, > >the actual ppm will be somewhat less. However, this gives a valuable gage > >of what you are making. > > > >I think your process and end product are very acceptable. > > > >Dan > > > > > >>------------------------------------------- > >>* From: * Carlos Pérez[SMTP:explorer...@hotmail.com] > >>* Sent: * Thursday, September 14, 2006 7:50:47 PM > >>* To: * silver-list@eskimo.com > >>* Subject: * Re: CS>CS to help cure Ehrlichiosis? > >> > >>Mike, > >> > >>I answered your second one before reading your first one! > >> > >>Since I have not yet been able to buy a good quality generator (it would > >>have to come from abroad), I am temporarily using the cheap one I have, > >>and > >>with it and with the help you wonderful people are giving me, I am making > >>a > >>better CS everyday. The voltage in the geneator is regulated to 27.5 V. > >>Using 12% by volume of the previous batch as a starter, the reaction > >>begins > >>at around 0.4 mA. It can not be seen, but the miliamperimeter shows it. > >>After 15 minutes it has risen to around 1.2 mA, and a faint activity can > >>be > >>seen wth the aid of a white light beam and a black background. 15 minutes > >>later the reading is around 1.8 mA and the activity is more noticeable. 15 > >>minutes later, the reading is around 3 mA, and the activity is very > >>evident > >>under the white beam. 15 minutes later, at the end of one hour from the > >>beginning, the reading is around 3.8 mA and the activity is very profuse. > >> > >>At this moment I stop the reaction, and I get a transparent product with > >>only a very slight yellowish hue. It has quite a strong silver flavour, > >>similar to the one I got in my very original cloudy soup with chunks of > >>silver and plenty of silver chloride I was making at the beginning, but > >>much > >>more decent looking. > >> > >>Following Terry´s suggestions, I bent the electrodes in an L form with a > >>wide curve (like a half straightened U), and the lower third part is > >>parallel to the bottom of the glass, and both electrodes parallel to each > >>other. > >> > >>This has given me excellent results, almost no brown sludge, almost no > >>sediment, and the cathode does not build a big bulk of silver-hydrogen > >>minibubbles at the end and many smaller ones all its length, insted there > >>are very numerous tiny fume-like streams being produced that float adrift, > >>with few and small silver-hydrogen balls being produced all along the > >>cathode. Even though it does not seem necessary, every few minuter I stirr > >>with a plastic spoon. The anode remains quite clean, only a mild brownish > >>creamy like covering that mostly comes out when cleaning with a paper > >>towel > >>at the end of the process. The cathode is practically totally clean after > >>wiping it with the paper towel. > >> > >>With the help of a friend of mine, by next week we should have built a > >>generator with a circuit based in a design John McLean very kindly sent > >>me, > >>with current control. We are oly missing one of the components ant it > >>should > >>be here next week. With it I should be able to make a much better product. > >> > >>I am very much interested in what you told me about the experience Robb > >>Allen and Bryan Posner have had with Lymes disease. I will get in contact > >>with the microelectricity germ killer Yahoo! group. > >> > >>I am still surprised there seems to be a total abscence of experience with > >>Ehrlichiosis!!. > >> > >>Is .999 silver good enough to make new electrodes? It is the best I have > >>found here so far to make larger diameter electrodes. The ones this > >>generator brought are 0.8 mm wire. Too thin in my opinion. This one I > >>found > >>is made in Switzerland, small ingot with stamped seal, case and > >>certificate. > >> > >>I will keep you friends informed about my learning process. > >> > >>Many thanks to all. > >> > >>Carlos > >> > > > > > >-- > >No virus found in this outgoing message. > >Checked by AVG Free Edition. > >Version: 7.1.405 / Virus Database: 268.12.2/442 - Release Date: 9/8/2006 > > > > > >-- > >The Silver List is a moderated forum for discussing Colloidal Silver. > > > >Instructions for unsubscribing are posted at: http://silverlist.org > > > >To post, address your message to: silver-list@eskimo.com > > > >Address Off-Topic messages to: silver-off-topic-l...@eskimo.com > > > >The Silver List and Off Topic List archives are currently down... > > > >List maintainer: Mike Devour <mdev...@eskimo.com> > > > > > > _________________________________________________________________ > FREE pop-up blocking with the new MSN Toolbar - get it now! > http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/