I delete /home/disk900G/workloads/classification1cpu/baseline/phase_00N/flexpoint_00* N is 0~9, and the error disappear.
Best Regards, Jed / jintang wang Huawei Technologies Co., Ltd. Email: [email protected] No.701, Jianghui RD, Binjiang District,Hangzhou 310000, P.R.China http://www.huawei.com -----Original Message----- From: Wangjintang Sent: Wednesday, August 21, 2013 2:32 PM To: 'M_NADERAN'; '[email protected]' Subject: RE: fixed//RE: error about run cloudsuite image (data analysis) on flexus When I finished create the "****phase_000/simics/phase_000 ~ ****phase_009/simics/phase_009", Another error happen. "[error] setting attribute files in sd0_image:" , need manual to create the file? Log is attach 2.log . Restore state from /home/disk900G/workloads/classification1cpu/baseline/phase_000/flexpoint_004/root/classification...Done Prepare flexstate for next flexpoint...Done Prepare job-load.simics for next flexpoint...Done Add flexus.load-state to custom-postload.simics Image memory limited to 1 GB [error] setting attribute files in sd0_image: Error opening file /home/disk900G/workloads/classification/1cpu/baseline/phase_000/simics/phase_000.sd0_image: No such file or directory Error while loading a configuration: Failed to initialize all objects This has left the configuration system in an inconsistent state. Restarting Simics is recommended. Failed to initialize all objects Failed reading configuration [job-load.simics:1] the command did not complete properly; interrupting script ERROR: Invalid return code from Simics: 1 </home/Flexus/flexus-4.1/result/classification/1cpu/trace-UP.Trace-22Aug13-050759/classification1cpu/000_000 Best Regards, Jed / jintang wang Huawei Technologies Co., Ltd. Email: [email protected] No.701, Jianghui RD, Binjiang District,Hangzhou 310000, P.R.China http://www.huawei.com -----Original Message----- From: M_NADERAN [mailto:[email protected]] Sent: Wednesday, August 21, 2013 12:50 PM To: Wangjintang Subject: RE: fixed//RE: error about run cloudsuite image (data analysis) on flexus If you want to create phases, I suggest you to use simics instead of flexus. Because phases are not directly related to flexus. Currently, they added some entries in .run_job.rc.tcl for simplicity. But in simics, you can load phase_000 and then run "c 100000000" and then write configuration to phase_001 and repeat this procedure for other phases. On 21.08.2013 08:46, Wangjintang wrote: > From “deploy_cloudsuite.pdf”,there are as below: > > “To create more phases according to your perefernce, you can either > use the scripts provided with Flexus (phases will be created > automatically), or you can do that manually, by loading phase_000 in > Simics and running for the desired interval (e.g., if you wish to > simulate the workload for 10 seconds and to use a total of 10 phases, > you should run for a duration of 1second between every two phases). > After running in the fastest Simics mode for the desired interval, you > should take a checkpoint in the corresponding directory (e.g., > /pathSto/phase_001/simics/phase_001) and do the same for all the > following phases.” > > 1. manual create more phases. > > In my opinion is that run simics at first, and then > > 1.1 use “run-cycles NumCycles” NumCyles is about 1s. > > 1.2 use the command “write-configuratio > ****phase_000/simics/phase_000” when simics stop for getting the > checkpoint. > > Then repeat 1.1/1.2, > > use “run-cycles NumCycles” , > > use the command “write-configuratio > ****phase_001/simics/phase_001” when simics stop for getting the > checkpoint. > > Continue to create phase_002~phase_009.It’s right? > > 2.” you can either use the scripts provided with Flexus (phases will > be created automatically)”. > > Where is the scripts for this ? or should I write the scripts myself? > > Best Regards, > > Jed / jintang wang > > Huawei Technologies Co., Ltd. > > Email: [email protected] > > No.701, Jianghui RD, Binjiang District,Hangzhou 310000, P.R.China > > http://www.huawei.com [1] > > FROM: Mahmood Naderan [mailto:[email protected]] > SENT: Tuesday, August 20, 2013 6:20 PM > TO: Wangjintang > CC: [email protected] > SUBJECT: Re: fixed//RE: error about run cloudsuite image (data > analysis) on flexus > >>Argument error: argument 1 > > (/home/disk900G/workloads/classification1cpu/baseline/phase_001/simics > /phase_001) given to 'read-configuration' has the wrong type; > >>an existing file (in the Simics search path) expected. > > The error is pretty obvious. There is no phase_001 in the given path. > > > > Links: > ------ > [1] http://www.huawei.com
