Hello everyone, I am trying to do my first installation and sysgen of RSX-11M+ (actually first of any RSX-11!) and I am follow the instructions at http://www.9track.net/pdp11/rsx4_sysgen and I am having problems right out of the gate. When I try to copy the baseline system this is what I get:
RSX-11M/RSX-11M-PLUS STANDALONE COPY SYSTEM V4.8 RSX-11M/RSX-11M-PLUS Standalone Configuration and Disk Sizing Program Valid switches are: /CSR=nnnnnn to change the default device CSR /VEC=nnn to change the default device vector /FOR=n to change the default magtape formatter number /DEV to list all default device CSR and vectors Enter first device: ms0: Enter second device: db0: Invalid device This is my config: set cpu 11/73 set rqb enable set rq0 ra92 set rq1 ra92 set rq2 ra92 set rq3 ra92 set rqb0 ra92 set rqb1 ra92 set rqb2 rx50 set rqb3 cdrom set tm disable set ts enable set vh enable set vh lines=16 at rq0 d0.dsk at rq1 d1.dsk at rq2 d2.dsk at rq3 d3.dsk at rqb0 db0.dsk at rqb1 db1.dsk at ts BB-J0830-01.M01_RSX11M+_V4.6_1999.tap set xq mac=08-00-2b-1a-2b-3c at xq eth0 set con telnet=1026 b ts Every source I have found says that an rq disk in simh should be db in RSX but it doesn't work. I have even tried other rq disks to no avail. I want to do some experimenting and join HECNET eventually which is why I chose such large drives. Any assistance would be kind and helpful. Thanks, Ray
_______________________________________________ Simh mailing list Simh@trailing-edge.com http://mailman.trailing-edge.com/mailman/listinfo/simh